Operations

Noted: the machine should be tightly connected with the ground.

1.    Get ready of the power, and press the power button, then the power indicator is lightened.

2.    Adjust the temperature to right range. When the temperature reaches the right range, the indicator on the top of temperature-adjuster is switch off. Then the following operations can be conducted.

3.    Adjust time-controller to right time.

4.    Flatly place the cap on the lower printing plate, then cover the printing paper (please note the working surface of the paper), push the handle down to specified point. Please notes that the force should not more than 25kg at this time, or otherwise, the handle will be transformed.